Description
Sensky BS010HL 12V 24V 3A PIR Motion Sensor Switch Distance Time Light Adjustable Light Sensor Switch(Black, with Light Sensor)
SummaryOperating Voltage: DC 5V-25V Load current:≤ 3ADetecting Range: 4M-7M (10cm-7M adjustable) 110 degrees cone angleDelay Time (Default setting): 5-25sec (2~360 Seconds is adjustable), flexible timing setting for how long the light stays onLight Sensor: 20lux (10Lux~300Lux adjustable), to adjust the light sensor, you can choose this 12v pir sensor working only at night or both at night and at day.Automatic Induction: With Light Sensor, the 12v motion sensor will be activated at night or at day with adjusting the light sensor. With PIR Motion Sensor, the 12v pir switch will be activated when people or your pets enter into the detection range.Sensky BS010HL 12V 24V 3A PIR Motion Sensor Switch Distance Time Light Adjustable Light Sensor Switch(Black, with Light Sensor) Description
Sensky BS010HL 12V 24V 3A PIR Motion Sensor Switch Distance Time
Light Adjustable Light Sensor Switch(Black, with Light
Sensor)
Operating Voltage: DC 5V-25V Load current:≤ 3A
Detecting Range: 4M-7M (10cm-7M adjustable) 110 degrees cone
angle
Delay Time (Default setting): 5-25sec (2~360 Seconds is
adjustable), flexible timing setting for how long the light stays
on
Light Sensor: 20lux (10Lux~300Lux adjustable), to adjust the
light sensor, you can choose this 12v pir sensor working only at
night or both at night and at day.
Automatic Induction: With Light Sensor, the 12v motion sensor
will be activated at night or at day with adjusting the light
sensor. With PIR Motion Sensor, the 12v pir switch will be
activated when people or your pets enter into the detection
range.
Sensky BS010HL 12V 24V 3A PIR Motion Sensor Switch Distance Time
Light Adjustable Light Sensor Switch(Black, with Light
Sensor)
PIR(Passive infrared) Motion sensor is pyroelectric device can
detect human movement by detecting Infrared ray emitted by human
body.
Operating voltage is 5~25V DC, and output voltage is equal to input
voltage.
High sensitivity, easy to install, widely used on the
motion-activated lighting, LED strips security system, automatic
sensory device and more.
Specifications:
Description: PIR Motion Sensor & Light Sensor
Operating Voltage: DC12V
Load Current:≤ 3A
 Delay Time: Default setting 5-25s (2~280 Seconds adjustable)
 Detecting Range: About 110 degrees cone angle
Detect Distance: 4M-7M (10cm-7M adjustable)
Light Sensor: 20lux (10Lux ~300Lux adjustable)
Trigger Way: continuous triggering
 Blockade Time: 0 seconds
Size: 48*25*14 mm
Note:
1. Dont exposed to direct sun light or lighting, big wind, near a
heater or air condition.
2. Dont fix it at a place where there are obstructing material
(e.g. Glass, dense clothes) which IR cannot get though.Â
3. Dont fix it in strong shock or vibration environment.
4. The 12v motion sensor requires a warm-up time in order to
function properly, about 10s to 1min, depend on the delay time;
during this time, the signal triggered by the module is not stable,
after one minute, it will be ready.5. Its just a sensor switch,
not including a light.
Most Popular in Electrical Testers
entry door replacement naperville, old door and window, entry door installation cleveland, inside window molding, andersen 200 patio door, exterior commercial glass door, insulated glass unit, ceiling to floor window, richlin windows review, dixieline lumber co national city, 4010 window, at your front door, casement window over kitchen sink, color schemes for a house, glass maker near me, sliding patio doors ratings
yyyyy
