Opis
2 In 1 Water Quality PH CL2 Tester Meter Pool Spa Analytical Instrument Portable Digital Ph And Chlorine Meter For Swimming Pool
SummaryOrigin:CN(Origin)With Backlight Or Not:YesIs Smart Device:noModel Number:PC102 new swimming pool water quality testerDisplay Type:DIGITAL2 In 1 Water Quality PH CL2 Tester Meter Pool Spa Analytical Instrument Portable Digital Ph And Chlorine Meter For Swimming Pool DescriptionName: Swimming pool water quality detectorModel: PC-101Chlorine test-adjustment point:Before the second use, please adjust the tester in the following order for the swimming pool water or hot spring water to be tested:1. Use traditional liquid testing tools to test swimming pool water or hot spring water;2. Record the chlorine reading for backup (1.5PPM);3. No need to adjust PH.Find the adjustment point of the tester:A. Put an AA 1.5 V battery (positive side facing up) in the battery slot of the handle.B. Hold the tester in one hand and the test rod in the other hand.C. Insert the cleaned metal rod into the water to the black position.D. Stir the water gently with a metal rod.E. When the metal rod is kept in the water, turn the knob on the front of the watch to the CL direction until it can no longer be moved. Then slowly adjust it back to the right until the pointer points to the traditionalThe position of the result measured by the liquid test tool (such as 1.5).F. Take the test rod out of the water, being careful not to move the knob. The pointer will slide to the right and stop with a letter between A and E. This letter is the adjustment point.Note: Before each chlorine test, the meter must be adjusted to the “adjustment point”.Test pH value:The recommended chlorine content for swimming pool water or hot spring water is 7.2 to 7.8A) Let the test stick stay in the water, turn the knob to the pH direction until it makes a beep (the battery must be taken out when reading the pH value).B) Wait until the pointer stops swinging and take a pH reading.C) Gently dry the test rod, insert it into the slot beside the tester and store it.Test the chlorine content:The recommended chlorine content of swimming pool water or hot spring water is 1.2 to 1.7ppmA) Adjust the pointer to the „adjustment point” position.B) Holding the tester in one hand and the test rod in the other hand, insert the metal rod into the water to the black position. Read the reading after the pointer stops swinging.C) Let the test stick stay in the water and continue to perform the pH test according to the instructions.specification1. Essential tools for swimming pools, saunas and hot springs2. The ideal tool for simply measuring the PH and C12 values of water3. No chemical composition, no need to guess for measurement4. Chlorine content level in the safe measurement range: 1.2-1.7ppm5. PH level within the safe measurement range: 7.2-7.86. Battery: Use 1 AA battery (not included)Storage method:In order to extend the service life of the swimming pool tester PC-101 and ensure measurement,Please note:1. When not in use, please adjust the knob to the closed position (to the PH direction until it can no longer be moved).2. Store in a cool, dry place and avoid direct sunlight.3. Do not immerse the test stick in any liquid except swimming pool water and hot spring water.4. Regularly check whether the battery power is sufficient-the tester uses an „AA” 1.5 V alkaline batteryPacking listPacking list; 1*water quality detector, English manual, blister packaging
Most Popular in Moisture Meters
how to measure patio door opening, replace a window cost, andersen sliding window, black mullion windows, black windows vs white windows cost, wood doors design, forest green exterior paint, sound proofing window, glass impact front door, what causes moisture on the inside of windows, old wooden windows craft ideas, colorado replacement windows, home to win cobourg, how to clean glasses without streaks, frontdoor om, how to clean windows that dont tilt, colonial trim, andersen window string repair
yyyyy
