Description
New PH-012 Quality Purity PH Meter Digital Water Tester for Biology Chemical Laboratory 0.00-14.00pH Analyzer
New PH-012 Quality Purity PH Meter Digital Water Tester for Biology Chemical Laboratory 0.00-14.00pH Analyzer DescriptionFeatures:
Instant and accurate measurement
Compact and portable design
Large and clear LCD backlight
Support 2-point pH6.86, pH4, pH10 calibration
Automatic temperature compensation (ATC)
The provided pH electrode tube can be easily replaced by the user.
It can be used in different industries and applications such as water sources, environmental monitoring, laboratories, hydroponics, aquariums, swimming pools, spas, and food processing.
Specifications:
Range 0.00-14.00PH
Accurancy Â0.2pH
Temperature Compensation: 0ÂC ~ 50ÂC
pH meter calibration:1. Immerse the pH electrode in a mixed phosphate standard buffer solution with a pH of 6.86 (at 25ÂC) and shake it gently.2. Use a small screwdriver to adjust the calibration potentiometer until the displayed value is consistent with the pH value of the standard buffer solution at ambient temperature.3. Insert the electrode into the standard buffer solution of pH4.00 potassium hydrogen phosphate benzene dicarboxylate or pH 9.18 borax.4. After about two minutes. The displayed value should be within the error tolerance range compared with the pH value of the buffer solution.
Steps: 1. Remove the protective cover.2. Clean the electrode of the pH meter with distilled water first. And wipe the electrode dry with filter paper.3. Turn on the switch located on the battery compartment.4. Insert the pH meter into the liquid to be measured until the liquid is immersed in the immersion line. If conditions permit, the solution can be immersed slightly above the immersion line.5. Gently stir the solution and wait for about two minutes. Read the displayed value.6. Finished use. Clean the electrode. Turn off the switch. Put on a protective cover.7. pH meter calibrator: the pH standard solid substance. It can be used after opening the package and adding water. It is suitable for the calibration of any type of acidity meter. The two specifications are pH=4.00; 6.86 and the validity period is five years.
Note: In the following cases, the PH meter must be recalibrated:
It has been used (or placed) for a long time after calibration;
Electrodes are used very frequently;
The measurement accuracy requirements are relatively high.
Package Included:
1 x pH Meter
Detail Pictures:
Most Popular in Electrical Testers
home depot brick nj store hours, 300 screen, screen door pet door insert, house front decoration ideas, vinyl windows black outside white inside, cost of closing off a window, home depot hammer lane stockton ca
yyyyy
